XBLW CP2119 is a DC bidirectional motor drive circuit chip designed and developed by Xinbole; The chip adopts SOP8 packaging, complies with ROHS standards, and the pin frame is 100% lead-free; It is suitable for applications such as toy motor drive, automatic valve motor drive, electromagnetic door lock drive, etc.

(1) Product Description:

      XBLW CP2119 is a single channel DC brushed motor driver chip with a working voltage range of 3V to 20V, supporting multiple lithium batteries. It can provide an output current of up to 5.0A, with an NMOS on      impedance (Ron1) of 0.077 Ω and a PMOS

      The conduction impedance (Ron2) is 0.033 Ω. The chip has two logic input terminals for controlling the forward, backward, and braking of the motor. It has good anti-interference ability, small standby current, and low output internal resistance. At the same time, it also has a built-in diode that can release the reverse surge current of inductive loads. XBLW CP2119 is compatible with replacing SS6285L/SA8330/AIIP6190

(2) Features:

      ●Drive a brushed DC motor along the way

●Small standby current, less than 1uA

●Low conduction impedance

●Maximum output continuous current 5.0A

●Working voltage range: 3.0V~20V

●There is an emergency stop function

●Has overheat protection function

●Equipped with overcurrent embedding and short-circuit protection functions

（3) Comparison of product parameters:

limit parameter

(4) Performance Summary: XBLW CP2119 is a motor driver chip that can be pin to pin replaced with SS6285L/SA8330/AIIP6190 `. Compared to SS6285L, it has a wider input voltage range and greater output current capability, making it suitable for a wider range of product applications with voltage and current requirements. In addition, XBLW CP2119 has lower power consumption and can provide higher energy efficiency.

XBLW CP2119 driver module

（5）Replacing can bring the following advantages:

1. A wider input voltage range: The operating voltage range of XBLW CP2119 is 3V to 20V, which is wider than other models and can adapt to a wider range of power supplies i. u1 U! w& D

2. Larger output current capability: XBLW CP2119 can provide up to 5.0A output current, which is higher than other models and can meet the motor drive requirements for larger currents.

3. Lower power consumption: XBLW CP2119 has lower power consumption during operation, which can improve the overall system's energy efficiency and endurance. By replacing with XBLW CP2119, greater flexibility and performance advantages can be obtained, enabling the product to adapt to a wider range of application scenarios and achieve higher power efficiency. Please note to carefully verify the compatibility of pin functionality and circuit connections during replacement to ensure normal motor drive functionality and stable performance