1. Working principle  

      Electric angle grinders use high-speed rotating lamella grinding wheels, rubber grinding wheels, wire wheels, etc. to grind, cut, rust remove, and polish metal components. The angle grinder is suitable for cutting, grinding and brushing metal and stone. Do not use water during operation. A guide plate must be used when cutting stone. For models equipped with electronic controls, grinding and polishing operations can also be performed if suitable accessories are installed on such machines.

2. Plan introduction 

      High-voltage brushless angle grinder controller, the control method adopts non-inductive FOC, the input voltage is 220VAC, the output power is up to 1300W, the high-voltage brushless angle grinder motor has a high speed of 30,000 rpm and a large output power. The control board should be placed inside the handle. ,small volume. 

3. Hardware part 

4. Application scenarios 

Cutting discs (diamond blades)/wire wheel brushes/grinding discs/polishing discs/bar saw blades/marble cutting discs/aluminum alloy cutting discs

5.Customer plan customization and selection

The XBLW brand is Xinboleic’s own brand. All devices are designed, packaged and tested in China. If you have any needs for related products or devices or related plans, please contact the official website: https://www.xinboleic.com/

Contact information
Email
: