The core of power management of industrial control equipment lies in its efficient and reliable power conversion module.
Compared with traditional linear regulators, the XBL4015 step-down DC/DC converter can achieve high-efficiency voltage conversion through its topology.
This article recommends the XBL4015 high-performance step-down DC/DC converter optimized for industrial control power supplies. It has a wide input voltage range of 4.5V~36V and can adapt to industrial site fluctuations;
Adopting advanced adaptive control technology, it has fast dynamic response and a maximum load of 5A, ensuring stable load mutation; high conversion efficiency, up to 93%, significantly reducing power consumption and heat, and improving system reliability.
Product overview
The XBL4015 is a PWM step-down DC/DC converter with a fixed frequency of 180KHz, which can drive a 5A load with high efficiency, low ripple and excellent linearity and load regulation performance. Its streamlined design requires a small number of external components, simplifying the use process, and has built-in frequency compensation and fixed-frequency oscillator, making the entire system design more efficient and convenient.
Product selection and design advantages
High efficiency and low ripple output
Ensure stable power output in a variety of application scenarios and reduce the impact on subsequent circuits.
Excellent linearity and load regulation performance
It can maintain the stability of the output voltage when the input voltage and load current change.
Minimal external components
Simplify design, reduce system complexity and cost
Built-in frequency compensation and fixed frequency oscillator
Reduce external compensation components, improve system stability, and facilitate customer development.
Application scenarios
Vehicle electronic equipment
consumer electronics
Industrial equipment power management
consumer electronics
battery charger
Pin configuration
It is packaged in TO-263-5L, and the specific pin definitions are as follows (top view):
-VIN: Power input pin, connected to the positive pole of the input power supply.
-VC: Control pin for shutdown function.
-SW: switch pin, connected to the inductor and freewheeling diode.
-FB: Feedback pin for output voltage regulation.
-GND: Ground pin, common ground for all circuits.
Functional block diagram
XBL4015 contains multiple functional modules, such as reference voltage source, start-up and bias current source, error amplifier (EA), feedback (FB) compensation (COMP), etc., to achieve efficient buck conversion function.
absolute maximum ratings
VIN (Input Voltage): Maximum value is 36V
VC (control voltage): maximum value is 36V
Operating temperature range: -40°C to +125°C
Storage temperature range: -65°C to +150°C
IOUT (output current): 5A maximum
5V/5A output typical application circuit
Typical system application of 12V/4A buck conversion circuit
Taking the output of 12V/4A as an example, typical application circuits and efficiency curves are provided to help users understand the performance and design requirements under specific output conditions.
-Input voltage range: 15V to 36V.
-Output voltage: 12V.
Output efficiency curve
总结
To sum up, in industrial control power supply applications, XBL4015 can easily cope with on-site voltage fluctuations due to its wide input voltage range of 4.5V~36V.
Significantly improves system power supply stability; continuous output current capability of up to 5A provides sufficient power for subsequent loads and ensures sufficient design margin;
The conversion efficiency of up to 93% significantly reduces power consumption and operating temperature, and its excellent thermal management capabilities perfectly meet the stringent requirements of 24/7 uninterrupted operation of industrial power supplies.
Recommend News
Follow Us
-
Phone
400-9682 003